J'ai suivi le tuto pour emuler tiger avec ppc. mais j'ai un probleme, ppc me met :
"[IO/PROM] <Error> can't open boot file"
j'ai cette erreur quelque soit le choix que je fais( demarrer sur le cd ou sur le hd)
Avez vous une piste pour r?ssoudre ce probl?me?
Voic mon fichier de config
[code:ba0f6a3975]## PearPC Configuration File
##
## Start Resolution
##
## (clients that use video.x can change the resolution at runtime,
## so this would be used only for starting up)
##
## format: "(width)x(height)x(depth)"
## or "(width)x(height)x(depth)@(frequency)"
##
## depth can only be 15 or 32
##
## default: "800x600x15"
##
ppc_start_resolution = "800x600x15"
##
## Redraw interval (in ms)
## must be between 10 and 500
##
## If you set this higher, PearPC will spend less time doing redraws (and so run faster)
## but feel less responsive. You should adjust this to your computer speed and personal
## preference.
##
redraw_interval_msec = 40
# ppc_start_full_screen = 1
##
## Key codes
##
key_toggle_mouse_grab = "F12"
key_toggle_full_screen = "Alt+Return"
##
## Loader
##
##
## Boot method
## this can be
## 1. "auto", prom will boot the first bootable partition found (default)
## 2. "select", prom will show you a list of bootable partitions
## 3. "force", prom will load and boot the local file prom_loadfile
##
# CD
# Select partition
prom_bootmethod = "select"
#prom_bootmethod = "auto"
## Example of how to use "force":
#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"
##
## bootargs: don't change unless you know what you are doing
## machargs: set to "-v" to get a verbose startup
##
#prom_env_bootargs = ""
prom_env_machargs = "-v"
##
## This is needed if you want to boot Mac OS X
##
prom_driver_graphic = "video.x"
## This will adjust the position of the initial page table (don't change)
#page_table_pa = 104857600
##
## CPU Config
##
## Processor Version Register
## Defaults to 0x00088302
## Only change if you know want you are doing
##
# cpu_pvr = 0x000c0000
cpu_pvr = 0x00088302
##
## Main memory (default 128 MiB)
## must be >= 64 MiB
##
memory_size=0x10000000
#
##
## IO Devices
##
##
## PCI IDE Config
##
## Drive type will be set according to file extension:
## .img: Harddisk (filesize must be multiple of 516096)
## .iso: CD-Rom
## Or you can override this by specifying the type via
## pci_ide0_master_type / pci_ide0_slave_type
pci_ide0_master_installed = 1
pci_ide0_master_image = "disk.img"
pci_ide0_master_type = "hd"
pci_ide0_slave_installed = 1
pci_ide0_slave_image = "cd1.iso"
pci_ide0_slave_type = "cdrom"
##
## Network
##
## Choose one of the cards
pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"
pci_rtl8139_installed = 1
pci_rtl8139_mac = "de:ad:ca:fe:12:35"
##
## USB
##
pci_usb_installed = 1
##
## NVRAM
##
nvram_file = "nvram" [/code:ba0f6a3975]
Merci d'avance pour vos r?ponses
